Your Will-Call Order Starts Here.
Will-Call is a voice-activated nurse call access device that gives residents and care recipients a hands-free way to call for help through the nurse call system they already use.
It connects to existing nurse call systems and allows residents to request assistance using a simple spoken phrase.
No Wi-Fi. No Bluetooth. No app. No change to staff workflow.
When the resident says, “I need help,” Will-Call activates the nurse call system and provides an audible acknowledgement:
“Okay, I have called someone to help you.”
Designed for long-term care, assisted living, rehabilitation, hospice, and home caregiving environments, Will-Call helps provide a safer and more dignified way for residents to call for assistance.
Each package includes
1 Will-Call unit with 1/4” jack
120V AC power adapter
Key Features
Voice-activated calling
Allows residents to request help by saying, “I need help.”Works with existing nurse call systems
Designed for standard 1/4” nurse call connections and adapter-based integration with select 8-pin DIN systems.No wireless setup required
No Wi-Fi, Bluetooth, mobile app, pairing, or network configuration.Audible request acknowledgement
Confirms the resident’s request with: “Okay, I have called someone to help you.”Built for real care environments
Pre-tested in long-term care, rehabilitation, assisted living, and home caregiving settings.Simple implementation
Designed to support existing caregiver workflows without adding new software or staff training.
Specifications
Dimensions: 4.13” L × 3.26” W × 2.27” H
Weight: 9.3 oz total
Will-Call unit: 5.8 oz
Power adapter: 3.5 oz
Color: White
Housing material: FDA-approved polypropylene
-
Will-Call is a hands-free, voice-activated nurse call device designed for residents who can’t press traditional call buttons. It plugs directly into existing call systems—no Wi-Fi, no Bluetooth, no apps required.
Just say “I need help,” and Will-Call alerts the nurse station.
Simple, reliable, and made for real-life caregiving needs.
-
Voice-activated: Residents simply say “I need help” to call for assistance.
Plug-and-play setup: No Wi-Fi, Bluetooth, or app required.
Compatible with most nurse call systems using a ¼” jack or an 8-Pin DIN
Request Acknowledgement: Responds with “Okay, I have called someone to help you” to acknowledge patient request
Designed for caregivers: Built to make daily routines easier and safer.
Pre-tested for real-world use in long-term care, rehab, and assisted living settings.
-
Breadth: 3.26"
Length: 4.13"
Width: 2.27"
Weight: 9.3 oz (5.8 oz Will-Call + 3.5 oz Adapter)
Color: White
Material: Polypropylene FDA Approved
-
Enhance Your Will-Call Device
Will-Call works right out of the box.
But in some cases, an accessory might make things even easier.
Ideal if the user has a soft voice or if Will-Call is far from the bed.
✔ Extends the built-in mic — no power needed
✔ Replace the default microphone with this extension.
Extended Microphone for Will-Call
This high-sensitivity lavalier microphone is designed for Will-Call users who need the microphone positioned closer to them for more reliable voice pickup.
It replaces the standard Will-Call microphone in special cases where a resident has a soft or low voice, uses a tracheostomy, or cannot consistently project their voice strongly enough for the standard microphone. The 78-inch cable allows the microphone to be extended from the Will-Call device and positioned closer to the resident’s usual speaking location.
The microphone uses an omnidirectional pickup pattern and is designed for sensitive voice capture. The MAONO UL11 also supports USB-C plug-and-play connectivity and 192 kHz / 24-bit audio capture.
Best for
Residents with a soft or low speaking voice
Residents with a tracheostomy or reduced vocal strength
Bedridden residents who need the microphone positioned close to their head or pillow
Situations where the standard Will-Call microphone does not provide sufficient voice pickup
Key Features
Extended placement: 78-inch cable allows the microphone to be positioned closer to the resident
Higher sensitivity: Designed for sensitive voice pickup in situations where the standard microphone may not be sufficient
Omnidirectional pickup: Captures sound from multiple directions around the microphone
Lavalier-style design: Small microphone can be positioned near the resident’s typical speaking area
USB-C plug-and-play connection: Connects directly without an additional adapter in supported setups
192 kHz / 24-bit audio capture: Designed to capture greater audio detail and clarity
Needed only for certain wall units with both RJ and 1/4” phone plug inputs.
✔ Splits one port into two: DIN 8 + 1/4" plug
✔ Keeps existing nurse call devices connected while adding Will-Call
✔ Compatible with systems like:
TekTone, Rauland, Hillrom, Jeron, Intercall, West-Call, and more
- TekTone Tek-CARE300III DIN 8
- Rauland Responder 5, III+, IV, 4000 DIN 8
- Intercall Legend II, Equinox II, Spectrum II DIN 8
- Jeron Pro-Alert 640, Provider 680 DIN 8
- Simplex, TekTone, Critical Alert – RJ45 8-pin
- West-Call – RJ50 10-pin
- Hillrom DB37, Headwall – 37-pin
A Type Y2 adapter, is a device that converts a single wall receptacle into two separate receptacles: one of the same style and another for a 1/4" phone plug. This allows for the connection of multiple nurse call devices or for adapting to different plug styles.
Compatible with:
TekTone Tek-CARE300III DIN 8
Rauland Responder 5 DIN8
Rauland Responder III+, IV, 4000 DIN8
Intercall Legend II; Equinox II; Specrum II DIN8
Jeron Pro-Alert 640 and Provider 680 DIN8
Simplex, TekTone, Critical Alert, RJ45 8-pin
West-Call, RJ50 10-pin
Hillrom DB37; Headwall, 37-pin
Use this if your panel is curved or recessed.
✔ Right-angle plug fits where straight jacks can’t
✔ Prevents strain on the cable behind beds or tight walls
✔ Plug-and-play — no setup needed
Some nurse call systems have ports that are hard to reach or recessed, making it difficult for the Will-Call’s 1/4” plug to connect properly. This 1-foot right-angle extension cable solves that.
It extends the reach of your existing 1/4” audio plug, giving you more flexibility when connecting to wall panels, consoles, or bedside systems. The right-angle design prevents cable strain and helps with tight installations.
**This is an add-on for the Will-Call device. Ships with your main order when purchased together.Got questions about Will-Call?
-
Will-Call is a voice-activated alternative to the nurse call button. Just say, “I need help” and the device triggers the nurse call station—no buttons, no wires, no need to reach.
-
No. Will-Call is fully offline and connects via a standard 1/4" jack or 8-pin DIN plug. It runs on hospital-grade power and never relies on wireless networks.
-
Yes. Our Test Drive program lets you try Will-Call for free. We ship the product directly to you, and you can test it before committing.
-
Plug it into a 120-volt power outlet and connect it to a 1/4" jack or 8-pin DIN nurse call panel within a 10 feet range of the patient
-
No training is required. Will-Call integrates with existing systems and works just like a traditional nurse call button—just voice-triggered instead.
-
You can support our growth through our GoFundMe campaign or visit our investment page to back Will-Call and help bring it to facilities across the country.
Still Have Questions?
Choosing the right setup matters and we're here to make it simple.
Speak directly with Bob Kaiser, the founder of Will-Call and a caregiver himself.
He’ll help you determine exactly what you need for your facility or loved one.
📞 Phone: (214)686.0453
📧 Email: kaiserbob@me.com